add dracula theme

i3/.config/i3/config

@@ -1,5 +1,5 @@
 # This file has been auto-generated by i3-config-wizard(1).
-# It will not be overwritten, so edit it as you like.
+# It will 'FiraCode Nerd Font Mono'not be overwritten, so edit it as you like.
 #
 # Should you change your keyboard layout some time, delete
 # this file and re-run i3-config-wizard(1).
@@ -13,7 +13,8 @@ set $mod Mod4
 
 # Font for window titles. Will also be used by the bar unless a different font
 # is used in the bar {} block below.
-font pango:monospace 8
+#font pango:monospace 8
+font 'FiraCode Nerd Font Mono' 8
 
 # This font is widely installed, provides lots of unicode glyphs, right-to-left
 # text rendering and scalability on retina/hidpi displays (thanks to pango).
@@ -55,12 +56,13 @@ bindsym $mod+Return exec /etc/profiles/per-user/hactario/bin/alacritty
 bindsym $mod+Shift+a kill
 
 # start dmenu (a program launcher)
-bindsym $mod+d exec --no-startup-id dmenu_run
+# bindsym $mod+d exec --no-startup-id dmenu_run
 # A more modern dmenu replacement is rofi:
 # bindcode $mod+40 exec "rofi -modi drun,run -show drun"
 # There also is i3-dmenu-desktop which only displays applications shipping a
 # .desktop file. It is a wrapper around dmenu, so you need that installed.
 # bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
+bindsym $mod+d exec "dmenu_run -nf '#F8F8F2' -nb '#282A36' -sb '#6272A4' -sf '#F8F8F2' -fn 'Hack-10.5' -p 'launch% '"
 
 # change focus
 bindsym $mod+j focus left
@@ -183,20 +185,25 @@ mode "resize" {
 
 bindsym $mod+r mode "resize"
 
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
+client.focused          #6272A4 #6272A4 #F8F8F2 #6272A4   #6272A4
+client.focused_inactive #44475A #44475A #F8F8F2 #44475A   #44475A
+client.unfocused        #282A36 #282A36 #BFBFBF #282A36   #282A36
+client.urgent           #44475A #FF5555 #F8F8F2 #FF5555   #FF5555
+client.placeholder      #282A36 #282A36 #F8F8F2 #282A36   #282A36
+client.background       #F8F8F2
 
 bar {
-    font DroidSansMNerdFont, FontAwesome 12
-    position bottom
-    status_command i3status-rs ~/.config/i3status-rust/config.toml
-    colors {
-        separator #666666
-        background #222222
-        statusline #dddddd
-        focused_workspace #0088CC #0088CC #ffffff
-        active_workspace #333333 #333333 #ffffff
-        inactive_workspace #333333 #333333 #888888
-        urgent_workspace #2f343a #900000 #ffffff
-    }
-}
+  font 'FiraCode Nerd Font Mono',FontAwesome 12
+  position bottom
+  status_command i3status ~/.config/i3status-rust/config.toml
+  colors {
+    background #282A36
+    statusline #F8F8F2
+    separator  #44475A
+    focused_workspace  #44475A #44475A #F8F8F2
+    active_workspace   #282A36 #44475A #F8F8F2
+    inactive_workspace #282A36 #282A36 #BFBFBF
+    urgent_workspace   #FF5555 #FF5555 #F8F8F2
+    binding_mode       #FF5555 #FF5555 #F8F8F2
+  }
+}

i3/.config/i3status/config

@@ -0,0 +1,91 @@
+general {
+
+  output_format = "i3bar"
+  colors = true
+  color_good = "#50FA7B"
+  color_degraded = "#F1FA8C"
+  color_bad = "#FF5555"
+  interval = 5
+}
+
+order += "ipv6"
+order += "disk /"
+order += "run_watch DHCP"
+order += "run_watch VPNC"
+order += "path_exists VPN"
+order += "wireless wlan0"
+order += "ethernet eth0"
+order += "battery 0"
+order += "cpu_temperature 0"
+order += "memory"
+order += "load"
+order += "tztime local"
+order += "tztime berlin"
+
+wireless wlan0 {
+        format_up = "W: (%quality at %essid, %bitrate) %ip"
+        format_down = "W: down"
+}
+
+ethernet eth0 {
+        format_up = "E: %ip (%speed)"
+        format_down = "E: down"
+}
+
+battery 0 {
+        format = "%status %percentage %remaining %emptytime"
+        format_down = "No battery"
+        status_chr = "⚡ CHR"
+        status_bat = "🔋 BAT"
+        status_unk = "? UNK"
+        status_full = "☻ FULL"
+        path = "/sys/class/power_supply/BAT%d/uevent"
+        low_threshold = 10
+}
+
+run_watch DHCP {
+        pidfile = "/var/run/dhclient*.pid"
+}
+
+run_watch VPNC {
+        # file containing the PID of a vpnc process
+        pidfile = "/var/run/vpnc/pid"
+}
+
+path_exists VPN {
+        # path exists when a VPN tunnel launched by nmcli/nm-applet is active
+        path = "/proc/sys/net/ipv4/conf/tun0"
+}
+
+tztime local {
+        format = "%Y-%m-%d %H:%M:%S"
+        hide_if_equals_localtime = true
+}
+
+tztime berlin {
+        format = "%Y-%m-%d %H:%M:%S %Z"
+        timezone = "Europe/Berlin"
+}
+
+load {
+        format = "%5min"
+}
+
+cpu_temperature 0 {
+        format = "T: %degrees °C"
+        path = "/sys/devices/platform/coretemp.0/temp1_input"
+}
+
+memory {
+        format = "%used"
+        threshold_degraded = "10%"
+        format_degraded = "MEMORY: %free"
+}
+
+disk "/" {
+        format = "%free"
+}
+
+read_file uptime {
+        path = "/proc/uptime"
+}